HKL-1500 Colorimeter for petroleum products
Overview
HKL-1500 Colorimeter for petroleum products conforms to the ASTM D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale). Using a standard light source, a liquid sample is placed in the test container and compared with colored glass disks ranging in value from 0.5 to 0.8. When an exact match is not found and the sample color falls between two standard colors, the higher of the two colors is reported.
Features
Thoroughly clean the colorimetric tube using lens cleaning paper.
Fill a colorimetric tube with distilled water to a depth of at least 50 mm. Then place it on the right side of the covered sample chamber as a reference liquid.
Insert another colorimetric tube into the clear sample to a depth of at least 50 mm, place it on the left side of the covered chamber, and then cover it. If the sample is turbid or opaque, heat it until the turbidity disappears, and then immediately transfer it to the colorimetric tube for measurement.
If the sample color exceeds color number 25 on the standard glass color wheel, dilute the sample with kerosene before measuring the color of the mixture. Dilution ratio: 15 parts sample to 85 parts kerosene (by volume).
Technical Parameters
Model: ASTM D1500
Input Voltage: AC 220V ±10%, 50Hz
Illumination Power: 100W
Overall Dimensions: 280mm × 330mm × 220mm (L × W × H)
Color Scale: 1–25
Colorimetric Tube: Inner Diameter: 32.5–33.4mm, Wall Thickness: 1.2–2.0mm, Total Height: 120–130mm
FAQ
Q1: What standards does this product (HKL-1500 Colorimeter for petroleum products) comply with?
A: HKL-1500 Colorimeter for petroleum products conforms to the ASTM D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale). Using a standard light source, a liquid sample is placed in the test container and compared with colored glass disks ranging in value from 0.5 to 0.8. When an exact match is not found and the sample color falls between two standard colors, the higher of the two colors is reported.
Q2: What is the significance and use of HKL-1500 Colorimeter for petroleum products?
A: Determination of the color of petroleum products is used mainly for manufacturing control purposes and is an important quality characteristic, since color is readily observed by the user of the product. In some cases, the color may serve as an indication of the degree of refinement of the material. When the color range of a particular product is known, a variation outside the established range may indicate possible contamination with another product. However, color is not always a reliable guide to product quality and should not be used indiscriminately in product specifications.
Q3: What is the minimum order quantity? How long is the delivery lead time?
A: We can only accept a minimum order of one unit. Please note delivery will be approximately 20 days after we receive your advance payment.
Q4: Do you provide product operation manuals or technical documentation?
A: We provide electronic formats of product manuals, quick operation guides, application cases, and standard operating procedures (SOPs). You may access them by logging into the download center on our website or by asking customer service to send you the files.
Q5: Do you provide online training services?
A: We may set up online installation and debugging at your convenience through the Internet. Through this online communication, we can also teach you and your staff the full operation of the equipment if you so desire. Besides this, we offer our end users 24/7 online training support all year round.
About us
Hong Kong Laboratory Technology Limited has been a dependable partner in the instrumentation industry since 2018. Over the past eight years, we have built a robust network, helping over 500 clients through the exclusive representation of more than 50 internationally acclaimed brands. We use our deep experience of the industry to provide a complete supply chain service from the initial Research and Development phase to the finished product, all supported by a rigorous quality management system. Our main instruments comply with the highest global standards (ISO 9001, ASTM, IP) and are frequently calibrated as per ISO/IEC 17025 standards, ensuring accuracy and reliability. Our passion is to enable both innovation and safety through our instruments in various fields like research centers, petrochemical and mining industries, hospitals and environmental organizations.
Company Advantages
(1)Full-Chain Resource Integration Capability
(2)Professional Technical Service Team
(3)Rich Industry Practical Cases
(4)Reliable After-Sales Service
Service Guarantee
1. Online Training Services
If needed, we will provide online installation and debugging services, as well as comprehensive operation training. We also offer 24/7 online training support to end users throughout the year.
2. Professional After-Sales Service
Depending on the type of instrument, we can provide professional repair services. Our goal is to become the highest quality and most reliable instrument supplier in the market. We welcome your valuable feedback and suggestions to help us continuously improve our service quality.
Logistics and Shipping
Worldwide Shipping: We have extensive experience in shipping goods to Asia, Europe, the Middle East, and other regions.
Secure Packaging: Laboratory instruments are carefully packed to ensure they are properly secured and protected during transit.
International Certification
|
|
ISO 9001 Certification | ASTM Certificate |
